2026-11-02
Radiator fins are essential components of automotive radiators and heat exchangers. They increase the heat transfer surface area and help improve heat dissipation. Their structure, dimensions and manufacturing quality directly influence heat exchanger performance.
Understanding common radiator fin types and forming processes helps manufacturers select suitable materials and production equipment.
Radiator fins improve heat transfer by increasing the surface area exposed to airflow. They are mainly manufactured through two processes: rolling and stamping.
Rolling: Generally used for fins with lower heights and larger pitches. It offers higher production efficiency.
Stamping: Commonly used for fins with greater heights and smaller pitches. Its production efficiency is relatively lower.
Common aluminum foil thicknesses used in radiator fin manufacturing include 0.12 mm, 0.15 mm, 0.17 mm, 0.2 mm and 0.3 mm.
Fin height can be adjusted according to production requirements, while fin pitch is fixed by the mold design.
Selecting suitable radiator fin forming machines and molds is important for achieving consistent fin dimensions and stable production. SUNHOPE supplies fin forming equipment and aluminum materials for radiator and condenser manufacturing.
Different heat exchanger fin types have different structures and airflow characteristics. Their heat transfer performance depends on the extended surface area and their ability to disturb airflow.
Straight fins feature long, smooth surfaces with rectangular flow passages. Their airflow characteristics are similar to fluid flowing through long, straight channels. Their relatively simple structure makes them a common fin design.
Serrated fins have uneven, segmented flow passages that increase airflow disturbance and turbulence, helping enhance heat transfer. They are often used in heat exchangers requiring improved thermal performance.
Corrugated fins are formed by pressing waves into flat aluminum fin material. Their wave structure promotes airflow turbulence. Generally, closer corrugations and greater wave amplitudes can improve heat transfer performance.
Perforated fins contain multiple holes punched into flat fin material. They are commonly used in inlet and outlet distribution sections and applications involving phase-change fluids.
Triangular fins offer good structural rigidity, lightweight construction and airflow disturbance. They are suitable for plate-fin heat exchangers and can be efficiently formed.
However, their line-contact structure places higher demands on welding quality. If fin height exceeds the required tolerance, pressure resistance may be affected.
Fin structure, aluminum foil thickness and forming accuracy all influence radiator manufacturing quality. Manufacturers should select suitable fin forming processes, molds and equipment according to their product designs.
SUNHOPE supplies radiator fin forming machines, fin-related equipment and aluminum foil materials for radiator and condenser production. These products support manufacturers looking to establish new workshops or upgrade existing production facilities.
Choosing the right aluminum fin forming equipment helps maintain consistent dimensions and improve production efficiency.
Q1: What aluminum foil thicknesses are commonly used for radiator fins?
Common thicknesses include 0.12 mm, 0.15 mm, 0.17 mm, 0.2 mm and 0.3 mm.
Q2: What is the difference between rolling and stamping fin forming?
Rolling is generally used for lower fins with larger pitches and offers higher production efficiency. Stamping is commonly used for higher fins with smaller pitches, with relatively lower production efficiency.
Looking for radiator fin forming machines or aluminum foil materials? Contact SUNHOPE to discuss your manufacturing requirements and suitable equipment options.
いつでもお問い合わせください
